A wind solar street light controller is a controller designed to convert the energy created by the direct solar panel light directly into electricity. In other words it does not convert the available sunlight to direct current as the direct current from the solar panel is only for a few seconds to several minutes. Although, due to the limitations of a wind power system it can't convert sunlight directly into electricity for a long time. In order to operate as an effective street light controller, the solar energy collector must be designed to be able to process the sunlight to get the required amount of energy. In this regard, wind solar street light controllers often contain cooling elements such as a condenser, to control the speed of the light and the amount of electricity it generates.

The wind solar street light controller are designed to turn on to the lowest possible power when the sun is high in the sky, enabling you to create your own sunny garden without the need to rely on AC power plants or other lighting sources.What kind of motors will fit with wind solar street lights? This type include:The majority of motor sizes will fit the wind solar street lights.
Most wind solar street light controller is controlled by a control panel with an electronic control panel integrated in the housing. When you connect it to the wall, it will control both the electric and electric generator outputs. It will act like a relay with two modes of output – one for driving the LED and the other the generator, but this setup is much more compact and compact design is what we are doing. You get a much simpler electric generating setup, but a very high power output. For example, a low voltage controller for driving the LED can output 30 watts, while a standard high voltage converter with a very high current can only provide about 7 watts of power to the LED.