language
中国
韩国
韩国
韩国
韩国
韩国
logo

News

Selection of MPPT wind solar street light controller

(Summary description)MPPT wind solar street light controller is used in the solar lighting system and is responsible for coordinating the work of solar panels, batteries, and loads. It is one of the most critical components in the solar street light lighting system and provides guarantee for the efficient and safe operation of the entire solar lighting system.

Selection of MPPT wind solar street light controller

(Summary description)MPPT wind solar street light controller is used in the solar lighting system and is responsible for coordinating the work of solar panels, batteries, and loads. It is one of the most critical components in the solar street light lighting system and provides guarantee for the efficient and safe operation of the entire solar lighting system.

Information

MPPT wind solar street light controller is used in the solar lighting system and is responsible for coordinating the work of solar panels, batteries, and loads. It is one of the most critical components in the solar street light lighting system and provides guarantee for the efficient and safe operation of the entire solar lighting system. 

MPPT wind solar street light controller

MPPT wind solar street light controller is mainly used for solar lighting and power supply systems such as solar garden lights, commercial district streets, factory park roads, traffic lights, garden landscape lights, pastoral areas, and unmanned communication base stations.

As an MPPT wind solar street light controller, it should have the following basic functions: charge the battery in the best charging state, automatically turn on and off street lights or loads, and have overload protection, short circuit protection, reverse discharge protection, and reverse polarity. Protection, lightning protection, undervoltage protection, overcharge protection, load recovery settings.

Attention should be paid to the selection of MPPT wind solar street light controller:

1. The controller with lower power consumption should be selected. The controller works continuously for 24 hours. If its own power consumption is large, it will consume part of the power. It is best to choose a controller with a power consumption of less than 3 mA.
2. Choose a controller with high charging efficiency, a controller with a three-stage charge control mode of strong charge, balanced charge, and floating charge. It adopts MCU intelligent control. Through internal calculations, it can always charge the battery with the maximum power, especially In winter or when the light is insufficient, the charging mode using MCU intelligent control is about 20% more efficient than non-MCU intelligent controllers.
3. With high-precision control, high-precision is the comprehensive embodiment of product design, the embodiment of excellent material selection, and the embodiment of production technology. Non-high-precision control solar street light controllers often lead to high repair rates, poor reliability, and low market prices due to unreasonable product design, poor material selection, and so on.
4. Only use the MPPT wind solar street light controller with two separate controls, which is convenient for power adjustment of the entire lamp. At night when pedestrians are scarce, one or two lights can be automatically turned off to save electricity, and the power of LED lights can be adjusted. In addition to the above power-saving functions, when setting the controller under-voltage protection value, try to adjust the under-voltage protection value to ≥ 10.8V to prevent over-discharge of the battery.
 

Keyword:

Scan the QR code to read on your phone

About us   

Projects   

Messages      

Contact us   

Skype: ws.charger
Tel: +
86-755-28227280
Fax: +86-755-28227281
Email:
sales@huaxiaotech.com
Add:Qinghu Industrial Park,Qingxiang Road, 
Longhua District,Shenzhen,518129 CHINA

Copyright © 2015 Shenzhen HUAXIAO Technology Co.,Ltd. 

粤ICP备11104137号