language
中国
韩国
韩国
韩国
韩国
韩国
logo

News

Off grid wind solar system equipment installation points

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-22 13:35
  • Views:

(Summary description)In order to judge whether the off grid wind solar system battery components are working properly, the solar cells should be tested before installation, and the installer must compare the off grid wind solar system manufacturer's technical manual during the measurement.

Off grid wind solar system equipment installation points

(Summary description)In order to judge whether the off grid wind solar system battery components are working properly, the solar cells should be tested before installation, and the installer must compare the off grid wind solar system manufacturer's technical manual during the measurement.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-22 13:35
  • Views:
Information

In order to judge whether the off grid wind solar system battery components are working properly, the solar cells should be tested before installation, and the installer must compare the off grid wind solar system manufacturer's technical manual during the measurement.

off grid wind solar system

Off grid wind solar system equipment installation method:

1) Bracket installation method. A simple bracket device can be used to install a single solar cell array. Fix two angle-shaped galvanized steel brackets on the outer wall and roof of the building with screws, and connect the other pair of brackets to the ends of the solar cell module frame, and connect the two sets of brackets to form A simple, durable and inexpensive bracket device for installing solar cell arrays. The bracket device can be made rotatable, so as to adjust the inclination angle according to the season, so as to optimize the performance of the photovoltaic system.

2) Column installation method. Use a vertical column directly fixed on the ground to install the solar cell array. Generally speaking, a steel pipe with a diameter of 5 to 7 cm is very suitable as a material for this support structure. With this installation method, the inclination angle can also be adjusted according to the season to optimize the performance of the photovoltaic power generation system.

3) Ground installation method. When installing the off grid wind solar system battery array on the ground, the base should be made on the ground in advance, then the metal frame is fixed on the base, and finally the solar cell array is installed on the frame. The installation frame usually consists of two parallel trough beams. Use screws to fix the horizontal supporting aluminum profile on the trough beam. The horizontal supporting aluminum profile must have a high strength to prevent it from being damaged by the wind. Fix the aluminum frame of the solar cell array with screws on the upper and lower horizontal support aluminum profiles (should be fixed at the pre-measured inclination angle). You can also buy or make a bracket device that can adjust the inclination angle to adjust the inclination angle of the battery panel according to the season. Since the lime component in concrete will corrode aluminum materials, the metal frame directly installed on the concrete base should use galvanized steel.
 

Keyword:

Scan the QR code to read on your phone

About us   

Projects   

Messages      

Contact us   

Skype: ws.charger
Tel: +
86-755-28227280
Fax: +86-755-28227281
Email:
sales@huaxiaotech.com
Add:Qinghu Industrial Park,Qingxiang Road, 
Longhua District,Shenzhen,518129 CHINA

Copyright © 2015 Shenzhen HUAXIAO Technology Co.,Ltd. 

粤ICP备11104137号