logo

Product

Product

All categories
Number of views:
1000

Wind Turbine Generator Solar Charge Controller 600W

Retail price
0.0
Market price
0.0
Main function: 1. precise control of digital and intelligent 2. keep the battery in the full state
number:
VWG2008V2
cate:
12V
specification:
weight:
数量:
-
+
Stock:
0
1
Product description
Parameters

Wind Turbine Generator Solar Charge Controller 600W

VWG2008V2 W&S hybrid charge controller is a smart controller which control both wind turbine and solar panel charge to the battery or battery bank intelligently.It can detect of 12/24 V battery systems automatically.

With the LCD display deviceand LED indicator light.High accuracy control of the charge or discharge.High charge efficiency,

low no load losses,safety, reliability and long time;it’s a high cost performance charge controller.

Wind Turbine Generator Solar Charge Controller 600W Wind Turbine Generator Solar Charge Controller 600W

Main function:

1. precise control of digital and intelligent

2. keep the battery in the full state

3. prevent the battery overcharge

4. prevent the battery over discharge

5. prevent the battery reverse charge to PV cells

6. when the battery voltage reach to the setting, disconnect the charge circuit, automatically detect wind turbine output

voltage at the same time, when the wind generator output voltage is too high, the automatic braking of wind turbines

7. when the current is too large ,the controller is automatic protection and control of wind turbine braking the wind turbine

manual brake protection

8. if load current over the rated current, the controller automatically protected and locked “Load Over Current”

9. Counting charging current hours and discharging current hours of the battery, counting wind turbine and PV cell power generation

10. According to the battery voltage automatically set the stop charging voltage, load off voltage, load recovery voltage, the

braking current and braking time

11. Users could setup the Charge-on or off voltage, the load-off voltage, the Load on voltage, braking current and braking time etc,

according to their requirements

12. To prevent battery from over charging, Controller will automatically control the highest overcharge voltage of the battery , which is

no higher than 15V (as per 12V battery) or 30V (as per 24V battery).

Main parameters:

MODEL

VWG2008

Rated Power

600W (Best ration: wind turbine500W, PV cells100W)

Applicable batteries

12/24V,100-300Ah(automatic distinguish voltage)

Wind turbine automatically braking voltage

17.5V/32.5V (DC voltage after rectification)

Battery full charge cut

14.32V/28.64V(default, adjustable)

Battery low voltage disconnect load

10.98V/21.97V(default, adjustable)

Load on voltage

12.44V/28.88V(default, adjustable)

Charge current max

40A/20A

Load current max

35.61A/17.80A

Recovery time after the automatic braking

10 Seconds(default,adjustable)

No load loss

Less than 40mA

Dimensions

228×133×75mm

Weight

1.2kg

Working environment

Environment temperature -10℃~+50Relative humidity 0~90%

 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

About us   

Projects   

Messages      

Contact us   

Skype: ws.charger
Tel: +
86-755-28227280
Fax: +86-755-28227281
Email:
sales@huaxiaotech.com
Add:Qinghu Industrial Park,Qingxiang Road, 
Longhua District,Shenzhen,518129 CHINA

Copyright © 2015 Shenzhen HUAXIAO Technology Co.,Ltd. 

粤ICP备11104137号