language
中国
韩国
韩国
韩国
韩国
韩国
logo

News

The key points and details of stainless steel pole column installation

(Summary description)The stainless steel pole upright device and the treatment of the bottom layer shall conform to the following rules

The key points and details of stainless steel pole column installation

(Summary description)The stainless steel pole upright device and the treatment of the bottom layer shall conform to the following rules

Information

The stainless steel pole upright device and the treatment of the bottom layer shall conform to the following rules:

⑴The planned elevation,orientation and quantity of embedded parts of stainless steel pole and column must meet the requirements of planning and installation, and be treated with corrosion and rust prevention. When the embedded parts do not meet the requirements, effective measures shall be taken in time to supplement the embedded parts.

1.At the place where the stair railing column is installed, the bottom concrete must not be loose, and the elevation of the installation should meet the planning requirements. It is necessary to remove or repair the unevenness. The concave and the bottom honeycomb surface must not be repaired with cement mortar. Use high-strength concrete to repair, and after a certain strength, the railing installation can be carried out.

1.According to the planning and installation requirements, the distance and center line of the railing column installation should be correctly popped up.

2.The key to the operation of stainless steel rod and handrail device: ⑴Stainless steel pole upright device should be carried out according to the requirements and the order of construction ink line upward from the starting point.

⑵Inlays are equipped with machine glass, glass and other barriers, and the barriers should be installed after the column is completed.

⑶The handrails of stairs are generally welded (except for special sizes).

⑷After installation of metal handrails with long stainlesssteel pole(especially outdoor handrails), the joints should consider the flexible movable interface of the device which can be used to temperature changes. The elasticity of the movable joint should be generally considered if there is no requirement in planning 20mm.

Keyword:

Scan the QR code to read on your phone

About us   

Projects   

Messages      

Contact us   

Skype: ws.charger
Tel: +
86-755-28227280
Fax: +86-755-28227281
Email:
sales@huaxiaotech.com
Add:Qinghu Industrial Park,Qingxiang Road, 
Longhua District,Shenzhen,518129 CHINA

Copyright © 2015 Shenzhen HUAXIAO Technology Co.,Ltd. 

粤ICP备11104137号